DEVICE

DESCRIPTION

DATE

MANUFACTURER

REMARKS

PORTABLE TYPE III PLYWOOD PANEL BARRICADE

4’ – 8’ BARRICADE WITH 1” X 8” X 48” – 96” PLYWOOD PANELS REFLECTORIZED WITH TYPE III HIGH INTENSITY REFLECTIVE SHEETING MOUNTED ON TWO 1-1/2” X 1-1/2” X 3/16” X 63” ANGLE STEEL UPRIGHTS ATTACHED TO TWO 1-1/2” X 1-1/2” X 3/16” X 60” ANGLE STEEL BASE STANDS WITH 2” X 2” X 8” SQUARE STEEL TUBING RECEIVERS

 January 1, 2005

BENT MANUFACTURING COMPANY

APPROVED NCHRP REPORT 350, (23-NOV-98), (WZ-6)

RESTRICTIONS -- SUPPLEMENTARY SIGNS ATTACHED TO TYPE III BARRICADES SHALL BE CONSTRUCTED WITH AN APPROVED ALUMINUM LAMINATE SUBSTRATE.  THE APPROVED ALUMINUM LAMINATE SUBSTRATES SHALL BE EITHER ALPOLIC, DIBOND, OR REYNOLITE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM TO A TYPE III BARRICADE IS PROHIBITED. RESTRICT TO 25 SQ.FT.

“WBT3-SW”  5'-7' TALL TYPE III HOLLOW PLASTIC OR 2MM ALPOLIC PANEL BARRICADE

4’ –  12’ BARRICADE WITH EITHER HOLLOW EXTRUDED PLASTIC OR 2MM ALPOLIC  PANELS  REFLECTORIZED WITH  ANY 3M BRAND, ODOT APPROVED BARRICADE SHEETING MOUNTED ON TWO 1 ¾” X 1 ¾” X 60” OR 84” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING UPRIGHTS  ATTACHED TO TWO 1 ¾” X 1 ¾” X 60” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING BASE LEGS BY WELDED STUBS THAT FIT INSIDE THE UPRIGHTS WITH NO HORIZONTAL CROSS BRACE. 

January 1, 2005

KORMAN SIGNS, INC.

APPROVED NCHRP REPORT 350, (WZ-100, AMENDMENTS #3 AND #6)

RESTRICTIONS –SUPPLEMENTARY SIGNS ATTACHED TO KORMAN SIGNS TYPE III BARRICADES SHALL BE CONSTRUCTED WITH 2MM ALPOLIC 350 REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT ALUMINUM COMPOSITE LAMINATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.  UP TO 33 TOTAL SQUARE FEET OF 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND.  THE BOTTOMS OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE BOTTOM OF THE TOP RAIL.

“WBT3-SWH”  5'-7' TALL TYPE  III HOLLOW PLASTIC OR 2MM ALPOLIC PANEL BARRICADE

4’ –  12’  BARRICADE WITH EITHER HOLLOW EXTRUDED PLASTIC OR 2MM ALPOLIC  PANELS REFLECTORIZED WITH  ANY 3M BRAND, ODOT APPROVED BARRICADE SHEETING MOUNTED ON TWO 1 ¾” X 1 ¾” X 60” OR 84” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING UPRIGHTS  ATTACHED TO TWO 1 ¾” X 1 ¾” X 60” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING BASE LEGS BY WELDED STUBS THAT FIT INSIDE THE UPRIGHTS WITH HORIZONTAL CROSS BRACE.

January 1, 2005

KORMAN SIGNS, INC.

APPROVED NCHRP REPORT 350, (WZ-100,

AMENDMENTS #3 AND #6)

RESTRICTIONS –SUPPLEMENTARY SIGNS ATTACHED TO KORMAN SIGNS TYPE III BARRICADES SHALL BE CONSTRUCTED WITH 2MM ALPOLIC 350 REYNOL; TE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT ALUMINUM COMPOSITE LAMINATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.   UP TO 33 TOTAL SQUARE FEET OF 2MM ALPOLIC 350,  REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND.  THE BOTTOMS OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE BOTTOM OF THE TOP RAIL.

“EZ-KADE, WBT3-HP”  TYPE III HOLLOW PLASTIC OR 2MM ALPOLIC PANEL BARRICADE

4’ –  12’ BARRICADE WITH EITHER HOLLOW EXTRUDED PLASTIC OR 2MM ALPOLIC  PANELS  REFLECTORIZED WITH  ANY 3M BRAND, ODOT APPROVED BARRICADE SHEETING MOUNTED ON TWO 1 ¾” X 1 ¾” X 60” OR 84” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING UPRIGHTS  ATTACHED TO TWO 1 ¾” X 1 ¾” X 60” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING BASE LEGS BY HINGE PLATE BRACKETS WITH NO HORIZONTAL CROSS BRACE. 

January 1, 2005

KORMAN SIGNS, INC.

APPROVED NCHRP REPORT 350, (WZ-100, AMENDMENTS #3, #4 AND #6)

RESTRICTIONS –SUPPLEMENTARY SIGNS ATTACHED TO KORMAN SIGNS TYPE III BARRICADES SHALL BE CONSTRUCTED WITH 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT ALUMINUM COMPOSITE LAMINATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.  UP TO 33 TOTAL SQUARE FEET OF 2MM ALPOLIC 350,  REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND.  THE BOTTOMS OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE BOTTOM OF THE TOP RAIL.

“EZ-KADE, WBT3-HPH”  TYPE  III HOLLOW PLASTIC OR 2MM ALPOLIC PANEL BARRICADE

4’ –  12’  BARRICADE WITH EITHER HOLLOW EXTRUDED PLASTIC OR 2MM ALPOLIC  PANELS REFLECTORIZED WITH  ANY 3M BRAND, ODOT APPROVED BARRICADE SHEETING MOUNTED ON TWO 1 ¾” X 1 ¾” X 60” OR 84” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING UPRIGHTS  ATTACHED TO TWO 1 ¾” X 1 ¾” X 60” 14 GAUGE GALVANIZED PERFORATED SQUARE STEEL TUBING BASE LEGS BY HINGE PLATE BRACKETS WITH HORIZONTAL CROSS BRACE.

January 1, 2005

KORMAN SIGNS, INC.

APPROVED NCHRP REPORT 350, (WZ-100, AMENDMENTS #3,  #4 AND #6)

RESTRICTIONS –SUPPLEMENTARY SIGNS ATTACHED TO KORMAN SIGNS TYPE III BARRICADES SHALL BE CONSTRUCTED WITH 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT ALUMINUM COMPOSITE LAMINATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.  UP TO 33 TOTAL SQUARE FEET OF 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT  SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND.  THE BOTTOMS OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE BOTTOM OF THE TOP RAIL.

Type III Barricade

Model# T3-A Series

Anchor System Type III with MAST system with 12' and smaller rails with up to 25 square feet of lightweight substrate signs mounted ON OR ABOVE THE TOP RAIL WITH A MINIMUM HEIGHT TO THE TOP OF 87"  with or without lights

January 1, 2005

Plastic Safety Systems, Inc.                                

Approved NCHRP 350, 8-Dec-04, WZ-196, WZ-152, and WZ-166
 

restrictions -  Signs made of aluminum are not approved to be mounted in any configuration.

Type III Barricade

Model# 50000 Series

Breakaway Type III with plastic uprights/rails with 48" x 48" SIGN AND IS ONLY "acceptable WITH A LIGHTWEIGHT PLASTIC SIGN" SUBSTRATE.

January 1, 2005

Traffix Devices, Inc. 

Approved NCHRP Report 350, 9-Jul-01, WZ-108 

WBT3  TYPE III BARRICADE

PORTABLE TYPE III BARRICADE UTILIZING 1 ¾” OR 2” PSST SQUARE TUBING UPRIGHTS, LEGS AND OPTIONAL CROSSBAR BOLTED TOGETHER USING SPLICE PLATES

7-10-2003

KORMAN SIGN

WZ-100#3

RESTRICTIONS –SUPPLEMENTARY SIGNS ATTACHED TO KORMAN SIGNS TYPE III BARRICADES SHALL BE CONSTRUCTED WITH 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT ALUMINUM COMPOSITE LAMINATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.  UP TO 33 TOTAL SQUARE FEET OF 2MM ALPOLIC 350, REYNOLITE, DIBOND OR OTHER FHWA APPROVED EQUIVALENT  SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND.  THE BOTTOMS OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE BOTTOM OF THE TOP RAIL.

TD2500 (Wood & Angle Steel)

TD2550 (Wood & PSST)

TD2600 (Plastic Rail & Angle Steel)

TD2650 (Plastic & PSST)

Carbon steel upright frame and base stand with 2”x2” square tubing receiver.

Can accommodate flashing lights.

Frame made with Unistrut’s Telepar tubing with breakaway base, bracket and detachable feet.

Carbon steel upright frame and base stand with 2”x2” square tubing receiver.

Can accommodate flashing lights.Frame made with Unistrut’s Telepar tubing with breakaway base, bracket and detachable feet.

January 1, 2005

January 1, 2005

January 1, 2005

   January 1, 2005

Three D

Traffic Works, Inc.

430 N. Varney Street

Burbank, CA 91502

(818) 841-2182

Web:   http://www.trafficwks.com

APPROVED NCHRP REPORT 350, (WZ-85, WZ-54)

APPROVED NCHRP REPORT 350, (WZ-85, WZ-54)

APPROVED NCHRP REPORT 350, (WZ-128)

APPROVED NCHRP REPORT 350, (WZ-128)

RESTRICTIONS (APPLY TO ALL) –SUPPLEMENTARY SIGNS ATTACHED TO TYPE III BARRICADES SHALL BE CONSTRUCTED OF 2 MM THICK ALPOLIC 350 SIGN SUBSTRATE.  ATTACHING ANY OTHER TYPE OF RIGID SIGN SUBSTRATUM IS PROHIBITED.  UP TO 25 TOTAL SQUARE FEET OF NOTED SIGN SUBSTRATE.   SINGLE OR MULTIPLE SIGNS MAY BE ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE.  THE TOP OF RECTANGULAR SIGNS MAY BE AS HIGH AS THE TOP  OF THE TOP RAIL, THE MINIMUM MOUNTING HEIGHT IS 12 INCHES ABOVE THE ROADWAY.

TYPE III BARRICADE WITH WOOD, PLYWOOD, PLASTIC OR PLASTIC HOLLOW CORE STRIPED PANELS

TYPE III BARRICADE WITH 1/2” X 8” X 48” – 96” PANELS REFLECTORIZED WITH TYPE “G” HIGH INTENSITY REFLECTIVE SHEETING MOUNTED ON TWO 1-1/2” X 1-1/2” X 3/16” X 63” - 72” PERFORATED SQUARE STEEL TUBING (PSST) UPRIGHTS ATTACHED TO TWO 1-3/4” X 1-3/4” X 3/16” X 60” ANGLE STEEL OR SQUARE TUBE STEEL BASE STANDS WITH 1-3/4” X 1-3/4” X 18” SQUARE STEEL TUBING OR PSST RECEIVERS.

PROTECTION   SERVICES INC.

APPROVED NCHRP REPORT 350, (07-MAR-01) WZ-70 WITH REFERENCE TO: WZ-40, WZ-44, WZ-54, & WZ-55.

TYPE III BARRICADE FROM 48” (4 ft.) TO 96” (8 ft.) WIDE WITHOUT SIGNS.

TYPE III BARRICADE 48” (4 ft.) WIDE TO 72" (6FT.) WIDE FOR USE AS A SIGN SUPPORT WITH SINGLE OR MULTIPLE RIGID SIGNS CONSTRUCTED OF WOOD, PLYWOOD, OR .080 ALUMINUM SIGN SUBSTRATE.

RESTRICTIONS -- SUPPLEMENTARY RIGID SIGNS ATTACHED TO TYPE III BARRICADES SHALL BE LIMITED TO A MASS OF 25 lbs. EACH OR LESS, OR BE CONSTRUCTED OF AN APPROVED LIGHTWEIGHT SIGN SUBSTRATE.  EITHER SINGLE OR MULTIPLE SIGNS UP TO 25 TOTAL SQUARE FEET, ATTACHED DIRECTLY TO THE RAILS ANYWHERE ON THE BARRICADE WITH A MINIMUM OF 12” TO THE GROUND. ONE SIGN UP TO MAXIMUM 48X48 INCHES MAY BE MOUNTED ABOVE THE TOP OF THE TOP RAIL. FLASHING LIGHTS, IF USED, SHALL WEIGH A MAXIMUM OF 3.3 lbs. AND BE MOUNTED TO THE TOP OF THE PSST TYPE III BARRICADE/SIGN SUPPORT UPRIGHTS.